0
รวม 0.00 ฿
 x 

Your shopping cart is empty!

รวม 0.00 ฿

FREE DELIVERY !

3,000 บาทขึ้นไป*

Technical Support

ทดลองสินค้าหน้าร้าน บริการหลังการขาย

OPEN ( MON-SAT )

8.00-17.30(จ-ศ) 9.00-15.30(เสาร์)

Vibration Meter เครื่องวัดความสั่น FLUKE 805

Availability: กรุณาสอบถามค่ะ

เครื่องวัดความสั่น Vibration Meter > Vibration Meter เครื่องวัดความสั่นสะเทือน ของ มอเตอร์ เครื่องจักร แบริ่ง ฯ รุ่น FLUKE 805
สอบถามเกี่ยวกับสินค้า
Product Tags

เครื่องวัดความสั่นสะเทือน FLUKE 805

 

Vibration Meter

Features and Benefits

  • Innovative sensor design helps minimize measurement variations caused by device angle or contact pressure
  • Consistent data quality at both low and high frequency ranges
  • Four-level scale indicates severity of problems for overall vibration and bearing condition
  • Exportable data via USB
  • Trending in Microsoft® Excel using built-in templates
  • Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines
  • Crest Factor+ provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
  • Colored lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements
  • Temperature measurement with Infrared Temperature Sensor increases diagnostic capabilities
  • On-board memory holds up to 3,500 measurements
  • Audio output for listening to bearing tones directly
  • External accelerometer support for hard to reach locations
  • Flashlight for viewing measurement locations in dark areas
  • Large screen with high resolution for easy navigation and viewing

Specifications :

Vibration Meter

Low frequency range (overall measurement)

10 Hz to 1,000 Hz

High frequency range (CF+ measurement)

4,000 Hz to 20,000 Hz

Severity levels

Good, Satisfactory, Unsatisfactory, Unacceptable

Vibration limit

50 g peak (100 g peak-peak)

A/D converter

16-bit

Signal to noise ratio

80 dB

Sampling rate
        Low frequency
        High frequency

20,000 Hz

80,000 Hz

Real time clock backup

Coin battery

 

Sensor

Sensitivity

100 mV g ± 10%

Measurement range

0.01 g to 50 g

Low frequency range (overall measurement)

10 Hz to 1,000 Hz

High frequency range

4,000 Hz to 20,000 Hz

Resolution

0.01 g

Accuracy

At 100 Hz ± 5% of measured value

 

Amplitude Units

Acceleration

g, m/sec²

Velocity

in/sec, mm/sec

Displacement

mils, mm

 

Infrared Thermometer (Temperature Measurement)

Range

-20 °C to 200 °C (-4 °F to 392 °F)

Accuracy

±2 °C (4 °F)

Focal length

Fixed, at ~3.8 cm (1.5")

 

External Sensor

Note: Fluke supports but does not provide external sensors

Frequency range

10 Hz to 1,000 Hz

Bias voltage (to supply power)

20 V dc to 22 V dc

Bias current (to supply power)

Maximum 5 mA

 

Firmware

External interfaces

USB 2.0 (full speed) communication

Data capacity

Database on internal flash memory

Upgrade

Through USB

Memory

Up to 3,500 measurements

 

Radiated Emission

Electrostatic discharge: burst

Standard EN 61000-4-2

Electromagnetic interference

Standard EN 61000-4-3

RE

Standard CISPR 11, Class A

 

Environmental

Operating temperature

-20 °C to 50 °C (-4 °F to 122 °F)

Storage temperature

-30 °C to 80 °C (-22 °F to 176 °F)

Operating humidity

10% to 95% RH

(non-condensing)

Operating/storage altitude

Sea level to 3,048 meters (10,000 feet)

IP rating

IP54

Vibration limit

500g peak

Drop test

1 meter

 

General Specifications

Battery type

AA (2)Lithium Iron Disulfide

Battery life

250 measurements

Size (L x W x H)

24.1 cm x 7.1 cm x 5.8 cm

(9.5 in x 2.8 in x 2.3 in)

Weight

0.40 kg (0.89 lb)

Connectors

USB mini-B 7-pin, stereo audio output jack (3.5 mm Audio Plug), external sensor jack (SMB connector)

{tortags,2274,3}

สินค้าราคาพิเศษ

06 กุมภาพันธ์ 2567
06 กุมภาพันธ์ 2567
11 ธันวาคม 2566

Contact Us

Copyright © 2015 ponpe.com. All Rights Reserved.
การจ่ายเงิน