Black Ribbon
0
รวม 0.00 ฿
 x 

Your shopping cart is empty!

รวม 0.00 ฿
เข้าสู่ระบบ

สมัครสมาชิก


Order Now !

02-5316293,5-6

Technical Support

Demonstration-Training

OPEN ( MON-FRI )

8.00 AM - 5.30 PM

Our Walk-In Customers

Slide background
Slide background
Slide background
Slide background
Slide background
Slide background
Slide background
Slide background
Slide background
Slide backgroundcustomer1
Slide background
Slide background

WATER BATH : BEST SELLER

WNB 29 / MEMMERT อ่างน้ำร้อน WATERBATH

Availability: กรุณาสอบถามค่ะ

Waterbath WNB 29 สแตนเลสทนการกัดกร่อน อิเล็กทรอนิกส์ที่มีความแม่นยำและการป้องกันอุณหภูมิหลายระดับ มีความปลอดภัยสูง
สอบถามเกี่ยวกับสินค้า
Product Tags

อ่างน้ำร้อน รุ่น WNB 29

Standard delivery Waterbath

 

On this page, you can find all the essential technical data on the Memmert water bath. Our customer relations team will be pleased to help if you want further information. If you should require a customised special solution, please contact our technical specialists at This email address is being protected from spambots. You need JavaScript enabled to view it..

 

Properties  
Temperature
 
Temperature range in °C min. 5°C above ambient up to +95°C with additional boiling mode (+100°C)
Control of standard components  
Temperature 1 Pt100 sensor class A in 4-wire-circuit
Timer integrated digital timer from 1 min. to 99,59 hours for: ON continuous operation WAIT (delayed on for continuous and limited timed operation) HOLD
Safety  
Temperature control mechanical temperature limiter TB protection class 1 switching the heating off at approx. 30°C above max. temperature of the bath
Temperature control in case of overtemperature due to failure, the heating is switched off at approx. 10°C above the set temperature (fixed value)
Autodiagnostic system microprocessor PID-temperature controller with integrated autodiagnostic system with fault indicator
Heating concept  
Heating Baths corrosion-proof large-area heating on three sides
Standard equipment  
Controller digital display (LED) of set and actual temperature (0,1°C resolution) and of (remaining) programme time
Stainless steel interior
 
Dimensions W x H x D in mm w(A) x h(C) x d(B): 590 x 350 x 140 mm
Interior easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing, material no. 1.4301 (ASTM 304), laser-welded
Volume 29 l
Liquid level min. (H) 105 mm
Liquid level max. (I) 120 mm
Textured stainless steel casing  
Dimensions w(D) x h(G) x d(E): 818 x 516 x 238 mm
Electrical data  
Voltage 230 V, 50/60 Hz
Electrical load approx. 2400 W (during heating)
Packing/shipping data/Setting Up  
Installation The vent openings in the left and back side must remain unobstructed. Minimum wall spacing on all sides is 80 mm. The minimum spacing from the top of the bath to the next ceiling is 750 mm.
Transport information The appliances must be transported upright
Customs tariff number 8419 8998
Country of origin Federal Republic of Germany
WEEE-Reg.-No. DE 66812464
Dimensions approx incl. carton B x H x T: 910 x 610 x 400 mm
Net weight approx. 24 kg
Gross weight carton approx. 31 kg

Contact Us

Copyright © 2015 ponpe.com. All Rights Reserved.