Your shopping cart is empty!
_600.jpg)
Availability: กรุณาสอบถามค่ะ
Communication protocol
1. Overview
This agreement is used to agree on the communication protocol between the anemometer (lower computer) and the host computer (computer or smart device) for order control and data exchange. It adopts UART specification to facilitate the secondary development of the developer.
2. Scope
The "agreement" provides the functions are:
2.1. PC through the command to control the wind speed measurement module to complete the specified tasks, such as access to wind speed, temperature data;
2.2. Receiving time-out, if the received response is not the corresponding one, the receiving checksum is incorrect, and the receiving length byte is invalid, the command will be sent again immediately if the communication fails.
3. Glossary
Host computer: Management of wind speed measurement module dedicated intelligent equipment;
Lower computer: the anemometer;
RS232 : A 2-wire serial communication standard that supports duplex serial proximity communication;
4. physical interface
4.1. serial communication port electrical standards: The module uses the TTL level (3.3V) to communicate with the host computer via RS232 protocol
4.2. Information transmission method: Asynchronously, . 1 start bit, . 8 data bits . 1 stop bit, no parity bit.
4.3. data transfer rate: Support baud rate 19200bps .
Working current
unit | Minimum | Typical value | Maximum | |
mA | 7 | 8 | 10 | |
Operating Voltage | ||||
unit | Minimum | Typical value | Maximum | |
V | 3.6 | 5 | 9.5 |
Wind speed measurement error
unit | Measuring range | Resolution | Threshold | Accuracy | |
m / s ( m / s ) | 0 ~ 4 5 | 0 .1 | 0 . 8 | ±3%±0. 1 dgts | |
ft / min ( feet per minute ) | 0 ~ 8 8 0 0 | 19 | 157 | ±3%±1 0dgts | |
knots ( nautical miles / hour ) | 0 ~ 8 8 | 0 . 2 | 1.6 | ±3%±0. 1 dgts | |
km / hr ( km / h ) | 0 ~ 1 4 0 | 0.3 | 2.9 | ±3%±0. 1 dgts | |
mph ( miles / hour ) | 0 ~ 1 0 0 | 0.7 | 1.8 | ±3%±0. 1 dgts | |
Air temperature measurement error | |||||
unit | Measuring range | Resolution | Accuracy | ||
℃ | -1 0℃~50℃ | 0.2 | ±0.2℃ | ||
°F | 14°F~ 122°F | 0.36 | ±3.6°F |
Communication interface
Interface definition | |
red | DC power input (3.6 ~ 5V) |
green | RXD |
white | TXD |
black | GND |
Product specifications
Product Size | 66 * 29.5 * 178mm |
product weight | 83.7g |
Operating temperature | 0℃~ 5 0℃(3 2°F ~1 2 2°F) |
Storage temperature | - 2 0℃6 0℃( - 4°F 1 4 0°F) |
Product Information | |
Datasheet | ![]() |
Manual | ![]() |
BENETECH Catalog | ![]() |