is a portable, accurate handheld CO2 Monitor, which can be put on desktop also, to measure the CO2 concentration and ambient temperature. Used NDIR technology to improve the long term stability. Build-in several modes help you understand ambient air guality.
Features :
Ultra low cost CO2 Monitor achieved by New IR-SoC Technology .
It uses NDIR technology to improve the long term stability.
Portable, accurate handheld CO2 Monitor.
The Alarm mode will sound at 1000 PPM or adjust the alarm level
Max/Min mode
SPECIFICATIONS
Method - NDIR Display - LCD Independent CO2 and Temperature readings. Calculates and Displays Ventilation Rates
Sample Method - Diffusion or flow through (50 ~200 ml/min)
Performance - CO2
ZG 106
Measurement Range
0~3,000ppm
Resolution
1ppm at 0~1,000ppm; 5ppm at 1,001~2,000ppm; 10ppm at 2,001~3,000ppm
Accuracy
±50 ppm or ±5% of reading
Repeatability
±20 ppm
Temperature Dependence
±0.1% of reading per °C or ±2 ppm per °C, whichever is greater, referenced to 25°C
Pressure Dependence
0.13% of reading per mm Hg (Corrected via user input for altitude)
Response Time
Warm-Up Time
Performance - Temperature
Temperature Range
Display 32 to 122°F (0 to 50°C)
Display Resolution
0.1°F (0.1°C)
Display Options
°F / °C, or Off. Set with Up / Down button
Accuracy
±2°F (±1°C)
Response Time
20-30 minutes (case must equilibrate with environment)
Outputs OC: Normally Low,100mA max. @ 24VDC. Adjustable setpoint, factory setting is 1000ppm,hysteresis is 50ppm
One RJ-45 Connector digital output in RII protocol. One Graphing Software ZyAura® View( Under developing )
Power Supply Two power supply types Battery type: Alkaline, AA* 4 (80 hours) External: 6 VDC from external AC/DC adapter which is included in package(Use specified AC adapter only) Power Requirement 160 mA Peak, 15 mA average from 6V
General Operating Conditions Operating Temperature: 32-122°F (0-50°C) 0-95% RH, non-condensing