PONPE 532DO เครื่องวัดออกซิเจนในน้ำแบบดิจิตอล Digital Dissolved Oxygen Meter

กลับไปที่: DO Meter รุ่นแนะนำ

99-1,000.- อาจเปลี่ยนแปลง กรุณาสอบถาม

| Add Your Review

Availability: In Stock

PONPE

PONPE 532DO เครื่องวัดออกซิเจนในน้ำแบบดิจิตอล Digital Dissolved Oxygen Meter เป็นเครื่องวัดสำหรับวัดค่าออกซิเจนในน้ำและอุณหภูมิ ระบบไมโครโปรเซสเซอร์ ประมวลผลการวัดค่ารวดเร็วและแม่นยำ ตัวเครื่องกันน้ำ IP67

สอบถามเกี่ยวกับสินค้า

Full Description

Product Tags

ponpe 532do เครื่องวัดออกซิเจนในน้ำ dissolved oxygen meter oxygen do

PONPE 532DO เครื่องวัดออกซิเจนในน้ำแบบดิจิตอล Digital Dissolved Oxygen Meter

Product description

PONPE 532DO is a precision meter for measuring dissolved oxygen and temperature. The built-in microcomputer processor can calculate and compensate all measurement data related to dissolved oxygen and temperature. The shell of this instrument is waterproof, and the waterproof grade: IP67
This dissolved oxygen meter has two measurement units: % and mg/L.
The dissolved oxygen probe is a film with a polarographic sensor and a thermistor for temperature measurement and temperature compensation. The permeable film separates the measured solution from the sensing electrode, but allows oxygen to pass through the film to react , The solubility can be measured.

Specifications

Measuring range	Oxygen concentration (mg/L)	0.0-40. 0 mg/L
	Dissolved oxygen saturation (%)	0.0-300. 0%
	Temperature	0-40°C; 32-104°F
Resolution	Oxygen concentration (mg/L)	0.1 mg/L
	Dissolved oxygen saturation (%)	0.10%
	Temperature	0, 1°C; 0.1°F
Accuracy	Oxygen concentration (mg/L)	±1.5% °F. S.
	Dissolved oxygen saturation (%)	±1.5%F. S.
	Temperature	±0.5℃
Calibration mode	support single-point or dual-point automatic calibration, namely zero point or automatic 100% calibration in the air
Response time	≤45s (fast response at 20℃)
Temperature Compensation	ATC (0-50℃)
Battery power	low battery warning
Height compensation	none
Shut down	automatically shut down for about 15 minutes
Power supply mode	3*1. 5V button battery (not included)
Use environment	0-40℃ (32-104°F);RH max 90%
Dimensions and weight	1833737mm (7.21.51.5in)/80g

Calibration

One-point calibration or two-point calibration, any point calibration

One-point calibration: (satisfying normal use) 0.0% (oxygen-free water) or 100.0% (air).

Two-point calibration: 0.0% (oxygen-free water) and 100.0% (air) calibration at the same time

The instrument calibration is simple, make sure the probe is installed correctly before calibration:

1. 100.0%-After the value is stable in the air when the device is turned on, perform calibration. Press and hold the CAL. button for 5 seconds to release the button. The screen flashes 100.0%. After the flashing is completed, the calibration is completed.

2. 0.0%-After the value is stable in the anaerobic water under the power-on state, calibrate, press and hold the CAL. button for 5 seconds to release the button, the screen flashes 0.0%, the flashing is completed, the calibration is completed.

Package List

1 x host

1 x dissolved oxygen electrode

6 x Dissolved oxygen membrane group

1 x 1 manual