SUP-LDG Carbon steel body /SUPMEA  electromagnetic flow meter

Features

• Pipe diameter: DN15~DN1000
• Accuracy: ±0.5%(Flow speed > 1m/s)
• Reliability: 0.15%
• Electric conductivity:  Water: Min. 20μS/cm; Other liquid: Min. 5μS/cm
• Turndown ratio: 1:100
• Power supply: 100-240VAC，50/60Hz; 22-26VDC

Specification

Product: Electromagnetic flowmeter

Model: SUP-LDG

Diameter nominal: DN15~DN1000

Nominal pressure: DN6 - DN80, PN<4.0MPa; DN100 - DN150, PN<1.6MPa; DN200 – DN1000, PN<1.0MPa; DN1200 – DN2000, PN<0.6MPa

Accuracy: ±0.5%，±2mm/s(flowrate<1m/s)

Repetitiveness: 0.15%

Liner material: PFA, F46, Neoprene, PTFE, FEP

Electrode material: Stainless steel SUS316L, Hastelloy C, Titanium, Tantalum, Platinum-iridium

Medium temperature: Integral type: -10℃~80℃; Split type: -25℃~180℃

Power supply: 100-240VAC，50/60Hz / 22-26VDC

Electrical conductivity: IP65, IP68(optional)

Product standard: JB/T 9248-2015

Measuring principle

Mag meter works based on Faraday's law, when the liquid goes through the pipe at the flow rate of v with a diameter D, within which a magnetic flux density of B is created by an exciting coil, the following electromotive E is generated in proportion to flow speed v:

E=K×B×V×D

Where:
E－Induced electromotive force 
K－Meter constant 
B－Magnetic induction density
V－Average flow speed in cross-section of measuring tube 
D－Inner diameter of measuring tube