0
รวม 0.00 ฿
 x 

Your shopping cart is empty!

รวม 0.00 ฿

FREE DELIVERY !

3,000 บาทขึ้นไป*

Technical Support

ทดลองสินค้าหน้าร้าน บริการหลังการขาย

OPEN ( MON-SAT )

8.00-17.30(จ-ศ) 9.00-15.30(เสาร์)

SUP-LDG Remote type SUPMEA มิเตอร์วัดการไหลแบบสนามแม่เหล็ก electromagnetic flowmeter

Availability: กรุณาสอบถามค่ะ

SUP-LDG Remote type SUPMEA electromagnetic flowmeter
มิเตอร์วัดการไหลแบบสนามแม่เหล็ก จอแสดงผลแบบรีโมท มีความแม่นยำสูง มาตรฐาน RS485 ใช้งานได้หลากหลาย เหมาะสำหรับวัดของเหลว น้ำเสีย น้ำในกระบวนการผลิต อุตสาหกรรมอาหาร การวัดสารเคมีในโรงงานอุตสาหกรรม ฯลฯ
สอบถามเกี่ยวกับสินค้า
Product Tags

SUP-LDG Remote type / SUPMEA electromagnetic flow meter

 

Features

  • Accuracy: ±0.5%(Flow speed > 1m/s)
  • Reliably: 0.15%
  • Electric conductivity:  Water: Min. 20μS/cm
               Other liquid: Min. 5μS/cm
  • Flange: ANSI/JIS/DIN DN15…1000
  • Ingress protection: IP68
 

Specification

 Product  Electromagnetic flowmeter
 Model  SUP-LDG
 Diameter nominal  DN15~DN1000
 Nominal pressure  0.6~4.0MPa
 Accuracy  ±0.5%,±2mm/s(flowrate<1m/s)
 Liner material  PFA,F46,Neoprene,PTFE,FEP
 Electrode material  Stainless steel SUS316L, Hastelloy C, Titanium,
   Tantalum Platinum-iridium
 Medium temperature  Integral type: -10℃~80℃
   Split type: -25℃~180℃
 Power supply  100-240VAC,50/60Hz, 22VDC—26VDC
 Ambient Temperature  -10℃~60℃
 Electrical conductivity  Water 20μS/cm other medium 5μS/cm
 Structure type  Tegral type, split type
 Ingress protection  IP68
 Product standard  JB/T 9248-1999 Electormagnetic Flowmeter

 

Measuring principle

Mag meter works based on Faraday's law, and measure conductive medium with conductivity more than 5 μs/cm and flow range from 0.2 to 15 m/s. An Electromagnetic Flowmeter is a volumetric Flowmeter that measures the flow velocity of a liquid through a pipe. 

The measurement principle of magnetic flowmeters can be described as follows: when the liquid goes through the pipe at the flow rate of v with a diameter D, within which a magnetic flux density of B is created by an exciting coil, the following electromotive E is generated in proportion to flow speed v:

E=K×B×V×D

 

            Where:
              E-Induced electromotive force 
              K-Meter constant 
              B-Magnetic induction density
              V-Average flow speed in cross-section of measuring tube 
              D-Inner diameter of measuring tube                                                                            

principle

Contact Us