Your shopping cart is empty!
Availability: กรุณาสอบถามค่ะ
Product | Sanitary type electromagnetic flowmeter |
Model | SUP-LDGS |
Diameter nominal | DN15~DN100 |
Nominal pressure | 0.6~4.0MPa |
Accuracy | ±0.5%,±2mm/s(flowrate<1m/s) |
Repetitiveness | 0.2% |
Liner material | PFA, F46, Neoprene, PTFE, FEP |
Electrode material | Stainless steel SUS316L, Hastelloy C, Titanium, |
Tantalum, Platinum-iridium | |
Medium temperature | Integral type: -10℃~80℃ |
Split type: -25℃~180℃ | |
Ambient temperature | -10℃~55℃ |
Power supply | 100-240VAC,50/60Hz / 22VDC—26VDC |
Electrical conductivity | Water 20μS/cm other medium 5μS/cm |
Ingress protection | IP65, IP68(optional) |
Product standard | JB/T 9248-2015 |
Mag meter works based on Faraday's law, and measure conductive medium with conductivity more than 5 μs/cm and flow range from 0.2 to 15 m/s. An Electromagnetic Flowmeter is a volumetric Flowmeter that measures the flow velocity of a liquid through a pipe.
The measurement principle of magnetic flowmeters can be described as follows: when the liquid goes through the pipe at the flow rate of v with a diameter D, within which a magnetic flux density of B is created by an exciting coil, the following electromotive E is generated in proportion to flow speed v:
E=K×B×V×D
Where: |