0
รวม 0.00 ฿
 x 

Your shopping cart is empty!

รวม 0.00 ฿

FREE DELIVERY !

3,000 บาทขึ้นไป*

Technical Support

ทดลองสินค้าหน้าร้าน บริการหลังการขาย

OPEN ( MON-SAT )

8.00-17.30(จ-ศ) 9.00-15.30(เสาร์)

HI181J-CharcoalHI181J-Charcoal

HI181 HANNA เครื่องกวนสาร Magnetic Mini-Stirrers with Electrode

Availability: กรุณาสอบถามค่ะ

HI181 HANNA เครื่องกวนสาร พร้อมขาจับ Compact Magnetic Mini-Stirrers with Electrode Holder
สอบถามเกี่ยวกับสินค้า
Product Tags

เครื่องกวนสาร พร้อมขาจับ HI181 HANNA 

Compact Magnetic Mini-Stirrers with Electrode Holder

HI181K-OrangeHI181 are a family of lightweight and inexpensive magnetic mini-stirrers with an integrated electrode holder. The stirrers are compact and easy to handle, requiring very little space. Measurement setup is made simple with the adjustable electrode arm that can hold up to three 12 mm diameter or less electrodes. HI181 mini-stirrers are available in 11 colors, allowing easy recognition on crowded benchtops.

Details

Ideally when performing electrochemistry measurements, the sample being tested should be stirred. The use of a magnetic stirrer allows for proper mixing and the sample to be homogenous in consistency and temperature. The stirring of the sample also helps speed up the response time of a sensor in achieving a stable reading.

Compact, Colorful & Cost-Effective

The HI181 series of magnetic stirrers are compact and lightweight, allowing for easy handling in the laboratory environment. Limited area on laboratory benchtops is no longer a concern with these colorful, space-saving stirrers. Several HI181 mini-stirrers can be placed on the laboratory bench at once and the eleven available colors can help the user to recognize different samples. Power-indicating LED lights also assure users at a distance that the stirrer is in operation. The durable plastic covering will resist harmful effects of accidentally spilled chemicals. The HI181 magnetic stirrer is cost effective for the customer that does not need the added expense of a heating element, incorporating electronic controls that allow the user to easily regulate the speed with greater precision.

Built-In Electrode Holder

The adjustable electrode arm of the HI181 mini-stirrers is able to hold up to three 12 mm diameter or less electrodes. When paired with a multichannel meter, this feature allows simultaneous measurements of a single sample to be performed and viewed. For measurements that require temperature compensation, a Hanna temperature probe can be placed in the electrode holder to obtain accurately compensated readings.

Speedsafe™ 

Often in the lab a sample is removed from a stirrer before the speed is adequately reduced. Normally this would cause the internal motor to accelerate until it is damaged. To control the speed from changes in viscosity or removing of the load the HI181 magnetic mini-stirrer incorporates the Speedsafe™  mechanism. With Speedsafe™ , a speed sensing device (opto-sensor) is coupled with an FVC (frequency voltage converter) to monitor the stirring speed. As the speed reaches a preset maximum level, the speed limiter shuts down the VCO (voltage-controlled oscillator) to slow down the motor speed. This ensures that when the load is suddenly removed from the stirrer, the motor will not accelerate to such a high speed that will be hazardous to both the user and the stirrer; a feature not commonly found in conventional stirrers.

Specifications

Maximum Stirring Capacity 1 liter (0.26 gallons)

Min. Speed Range 100 rpm

Max. Speed Range 1000 rpm

Power Supply 110/115 VAC, 50/60 Hz

Installation Category II

Cover Material ABS plastic

Environment 0 to 50°C (32 to 122°F); RH max 95%

Dimensions 137 mm (dia) x 51 mm (h)

Weight 640 g (1.4 lbs.)

Ordering Information HI181 models are supplied with electrode holder, micro stir bar (1) and instructions.

 

 

Product Information
Datasheet  Product Brochure
Manual  คู่มือ เครื่องมือวัด
HANNA Catalog  คู่มือ เครื่องมือวัด

 

 

สินค้าราคาพิเศษ

06 กุมภาพันธ์ 2567
06 กุมภาพันธ์ 2567
11 ธันวาคม 2566

Contact Us