0
รวม 0.00 ฿
 x 

Your shopping cart is empty!

รวม 0.00 ฿

FREE DELIVERY !

3,000 บาทขึ้นไป*

Technical Support

ทดลองสินค้าหน้าร้าน บริการหลังการขาย

OPEN ( MON-SAT )

8.00-17.30(จ-ศ) 9.00-15.30(เสาร์)

HI122 Built-in PrinterHI122 HANNA

HI122 HANNA pH/ORP/Temperature Meter with Built-in Printer เครื่องวัดค่าโออาร์พี พีเอช และอุณหภูมิ พร้อมเครื่องพิมพ์ในตัว

Availability: กรุณาสอบถามค่ะ

HI122 HANNA pH/ORP/Temperature Meter with Built-in Printer เครื่องวัดค่าโออาร์พี พีเอช และอุณหภูมิ พร้อมเครื่องพิมพ์ในตัว
สอบถามเกี่ยวกับสินค้า
Product Tags

HI122 pH/ORP/Temperature Meter with Built-in Printer

เครื่องวัดค่าโออาร์พี พีเอช และอุณหภูมิ พร้อมเครื่องพิมพ์ในตัว

คุณสมบัติ

  • - ตรวจสอบการสอบเทียบ pH
  • - เวลาตอบสนองของอิเล็กโทรด
  • - จุดสอบเทียบ pH 5จุด
  • - บัฟเฟอร์ 7 มาตรฐานและ2 บัฟเฟอร์ที่กำหนดเอง
  • - คำเตือนอยู่นอกช่วงการสอบเทียบ
  • - จอ LCD ขนาดใหญ่ที่กำหนดเอง
  • - เครื่องพิมพ์พร้อมในตัว
  • - บันทึกข้อมูลอัตโนมัติ 2,000 บันทึก และเข้าสู่ระบบตามความต้องการ
  • - ความสามารถของ GLP
  • - สัญญาณเตือน เสียงสูงและต่ำ

 

ลักษณะ

  • - HI 122 เป็นเครื่องมือแบบตั้งโต๊ะที่มีเครื่องพิมพ์ในตัว ตรวจสอบการสอบเทียบ pH ได้ เวลาตอบสนองของอิเล็กโทรด และการตรวจสอบสภาพ และข้อความวินิจฉัยที่ได้รับการปรับปรุงระหว่างการสอบเทียบ
  • - มิเตอร์นี้ใช้อิเล็กโทรดชุด“ P” ของ HANNA เพื่อความแม่นยำยิ่งขึ้นเครื่องวัดเหล่านี้จะตรวจสอบด้วยว่าการวัดอยู่นอกช่วงการสอบเทียบหรือไม่ และเตือนผู้ใช้ในกรณีที่การวัดอยู่นอกจุดสอบเทียบมากเกินไป การสอบเทียบสามารถทำได้สูงสุด 5จุด โดยใช้บัฟเฟอร์ 7มาตรฐานที่รับรู้โดยอัตโนมัติ หรือโดยใช้ค่าบัฟเฟอร์ที่กำหนดเอง 2ค่า บัฟเฟอร์ที่ใช้ในระหว่างการสอบเทียบจะแสดงบนจอ LCD แม้ว่าจะอยู่ในโหมดการวัดก็ตาม
  • - ผู้ใช้สามารถเข้าสู่ระบบตามความต้องการได้ถึง 50 ตัวอย่าง (50 ตัวอย่างต่อช่องสำหรับรุ่นช่องสัญญาณคู่) มิเตอร์เหล่านี้มีการบันทึกข้อมูลอัตโนมัติสูงสุด 1,000 จุด (1000 จุดต่อช่องสัญญาณสำหรับรุ่นช่องสัญญาณคู่) พร้อมเกณฑ์การเริ่มต้นและการหยุดที่ยืดหยุ่น
  • - เครื่องมือนี้มีความสามารถของ GLP ที่ช่วยให้สามารถจัดเก็บและดึงข้อมูลทั้งหมดเกี่ยวกับการสอบเทียบ pH, rel mV, EC และ NaCl รวมทั้งข้อมูลเกี่ยวกับการบำรุงรักษาและสถานะของอิเล็กโทรด

 

การพิมพ์

-เครื่องพิมพ์ผลกระทบในตัวที่รวมอยู่ใน HI 122 ใช้กระดาษธรรมดาที่ไม่ซีดจางตามกาลเวลา ชุดข้อมูลที่สมบูรณ์ตามข้อมูลที่วัดได้ตั้งค่าหรือบันทึกไว้สามารถพิมพ์ได้ตามความต้องการ (สำหรับการอ่านปัจจุบันในโหมดการวัด GLP และโหมด SETUP) หรือโดยอัตโนมัติ (สำหรับโหมดอัตโนมัติและโหมดบันทึกตามความต้องการ) รุ่นเหล่านี้ยังอนุญาตให้ผู้ใช้พิมพ์ข้อมูลโดยละเอียดในสี่ภาษาสำหรับหน้าจอวิธีใช้และการตั้งค่าเครื่องมือ

 

สเปคของเครื่อง

ช่วงการวัด                                                    ความละเอียด            ความแม่นยำ

pH -2.00 to 16.00 pH; -2.000 to 16.000 pH   0.01 pH / 0.001 pH   ±0.01 pH / ±0.002 pH

ORP ±999.9 mV; ±2000 mV                        0.1 mV / 1 mV         ±0.2 mV (±699.9 mV) / ±0.5 mV (±999.9 mV) / ±1 mV (±2000 mV)

อุณหภูมิ -20.0 to 120.0ºC (-4.0 to 248.0ºF)   0.1°C (0.1ºF)           ±0.4°C (±0.7ºF) ไม่รวมข้อผิดพลาดของโพรบ

BNC input : 1 สำหรับอิเล็กโทรด pH

ตรวจสอบการสอบเทียบ : สถานะของสภาพอิเล็กโทรดและเวลาตอบสนอง

                                  สถานะของสารละลายบัฟเฟอร์ระหว่างการสอบเทียบ

ช่วงออฟเซ็ต mV สัมพัทธ์ : ±2000 mV

การสอบเทียบ pH อัตโนมัติสูงสุด 5 พ้อย พร้อมค่าจดจำ 7 ค่า (1.68, 4.01, 6.86, 7.01, 9.18, 10.01, 12.45) +2 บัฟเฟอร์แบบกำหนดเอง

การชดเชยอุณหภูมิ : อัตโนมัติหรือด้วยตนเอง -20.0 ถึง 120 °C (-4 ถึง 248 °F)

อิเล็กโทรด pH : HI 1131P,ตัวแก้ว,รีฟิล,ขั้วต่อ BNC +พิน, สายเคเบิล 1 ม.(รวมอยู่ด้วย)

หัววัดอุณหภูมิ : HI 7662-T พร้อมสายเคเบิล 1 ม. (3.3o’) (รวมอยู่ด้วย)

ความต้านทานของอินพุต : 1012 Ohm

Log-On-Demand 50 ตัวอย่าง

การบันทึกอัตโนมัติ : 10000 ตัวอย่าง

การเชื่อมต่อ PC : RS232 serial port, opto-isolated

เครื่องพิมพ์ : เครื่องพิมพ์ดอทเมทริกซ์ในตัวพร้อมกระดาษธรรมดา 44 มม

พาวเวอร์ซัพพลาย : อะแดปเตอร์ 12 Vdc (รวมอยู่ด้วย)

สภาพแวดล้อม : 0 ถึง 50 ° C (32 ถึง 122 ° F); RH สูงสุด 95%

ขนาด : 280 x 203 x 84 มม. (11.0 x 8.0 x 3.3 ")

น้ำหนัก : 1.9 กก. (4.2 ปอนด์)

 

property

  • - pH Calibration Check™
  • - Electrode response time
  • - Five pH calibration points
  • - Seven standard and two custom buffers
  • - Out of calibration range warning
  • - Large, custom LCD
  • - Built-in impact printer
  • - Automatic data logging of 2000 records and log on demand
  • - GLP capabilities
  • - High and low audible alarms

- HI 122 is a benchtop instrument featuring a built-in printer, Calibration Check™, electrode response time and condition monitoring, and enhanced diagnostic messages during calibration.

- This meter uses HANNA’s “P” series of electrodes. For more accuracy, these meters also check if the measurement is outside the calibration range and warns the user in case measurements are too far outside the calibration points. Calibration can be performed in up to five points using the standard seven buffers that are automatically recognized, or by using two custom buffer values. The buffer(s) used during calibration are displayed on the LCD even when in measurement mode.

- Users can log on demand up to 50 samples (50 samples per channel for dual channel model). These meters have automatic data logging of up to 1000 points (1000 points per channel for dual channel model) with flexible starting and stopping criteria.

- This instrument provides GLP capabilities that allows for the storage and retrieval of all data regarding pH, rel mV, EC and NaCl calibration as well as data regarding the maintenance and status of the electrode.

Printing

The built-in impact printer incorporated into the HI 122 uses regular paper that does not fade with time. A complete set of information based on the measured, set or recorded data can be printed on demand (for current reading in measurement mode, GLP and SETUP modes) or automatically (for autolog and log on demand modes). These models also allow users to print detailed information in four languages for specific help screens and instrument set-up.

Specifications:

Range pH -2.00 to 16.00 pH; -2.000 to 16.000 pH
  ORP ±999.9 mV; ±2000 mV
  Temperature -20.0 to 120.0ºC (-4.0 to 248.0ºF)
Resolution pH 0.01 pH / 0.001 pH
  ORP 0.1 mV / 1 mV
  Temperature 0.1°C (0.1ºF)
Accuracy pH ±0.01 pH / ±0.002 pH
  ORP ±0.2 mV (±699.9 mV) / ±0.5 mV (±999.9 mV) / ±1 mV (±2000 mV)
  Temperature ±0.4°C (±0.7ºF) excluding probe error
BNC Inputs   1 for pH electrode
Calibration Check   Status of electrode condition and response time
status of the buffer solutions during calibration
Relative mV
Offset Range
  ±2000 mV
pH Calibration   automatic, up to 5 points with 7 memorized values (1.68, 4.01, 6.86, 7.01, 9.18, 10.01, 12.45) + 2 custom buffers
Temperature Compensation   Automatic or manual, -20.0 to 120°C (-4 to 248°F)
pH Electrode   HI 1131P, glass body, refillable, BNC + pin connectors, 1 m cable (included)
Temperature Probe   HI 7662-T with 1 m (3.3') cable (included)
Input Impedance   1012 Ohm
Log-On-Demand   50 samples
Automatic Logging   1000 samples
PC Connection   RS232 serial port, opto-isolated
Printer   built-in dot matrix printer, with 44 mm plain paper
Power Supply   12 Vdc adapter (included)
Environment   0 to 50°C (32 to 122°F); RH max 95%
Dimensions   280 x 203 x 84 mm (11.0 x 8.0 x 3.3")
Weight   1.9 kg (4.2 lbs.)
 
Product Information
Datasheet  Product Brochure
Manual  คู่มือ เครื่องมือวัด
HANNA Catalog  คู่มือ เครื่องมือวัด

สินค้าราคาพิเศษ

06 กุมภาพันธ์ 2567
06 กุมภาพันธ์ 2567
11 ธันวาคม 2566

Contact Us