0
รวม 0.00 ฿
 x 

Your shopping cart is empty!

รวม 0.00 ฿

FREE DELIVERY !

3,000 บาทขึ้นไป* ส่งฟรี KERRY

Technical Support

ทดลองสินค้าหน้าร้าน บริการหลังการขาย

OPEN ( MON-SAT )

8.00-17.30(จ-ศ) 9.00-15.30(เสาร์)

pH Digital Controller PH500

Availability: กรุณาสอบถามค่ะ

pH500 series of controllers are simple to operate, microprocessor-based process meters packed with features.
สอบถามเกี่ยวกับสินค้า
Product Tags

pH Digital Controller PH500

 

เครื่องควบคุมค่า PH

  • Single or dual set point
  • Fully programmable
  • mA and VDC recorder output or RS232
  • Differential input for ground loop protection
  • Automatic three point calibration
  • Last calibration data
  • Automatic Temperature Compensation
  • Simple wiring with removable terminal modules

pH 500 series of controllers are simple to operate, microprocessor-based process meters packed with features. For more flexibility and better resolution for chart recorders, any two points between 0 and 14 pH can be chosen to correspond to the analog output spans. Several pH 500 models are equipped with a bi-directional RS232 port. Push button password programming prevents tampering.

The Fail Safe Alarm System protects the pH 500 against the pitfalls of process control, like power interruption or line failure. With pH 500 quick one, two or three point calibration at pH 4.01, 7.01 and 10.01 comes standard. The temperature can be manually or automatically compensated for. Models with RS232 output allow computer compatibility, a necessity for process control instrumentation. You can also choose from ON/OFF or proportional dosage to save on chemicals.

Choose your configuration

pH 500111-1 single setpoint, on/off control, analog output,  115V
pH 500111-2 single setpoint, on/off control, analog output, 230V
pH 500112-1 single setpoint, on/off control, RS232 output, 115V
pH 500112-2 single setpoint, on/off control, RS232 output, 230V
pH 500121-1 single setpoint, proportional control, analog output, 115V
pH 500121-2 single setpoint, proportional control, analog output, 230V
pH 500211-1 dual setpoint, on/off control, analog output, 115V
pH 500211-2 dual setpoint, on/off control, analog output, 230V
pH 500212-1 dual setpoint, on/off control, RS232 output, 115V
pH 500212-2 dual setpoint, on/off control, RS232 output, 230V
pH 500221-1 dual setpoint, proportional control, analog output, 115V
pH 500221-2 dual setpoint, proportional control, analog output, 230V
pH 500222-1 dual setpoint, proportional control, RS232 output, 115V
pH 500222-2 dual setpoint, proportional control, RS232 output, 230V

Order Information:
Each pH 500 model is supplied complete with mounting brackets and instructions.

Range pH 0.00 to 14.00 pH
  Temperature -9.9 to 120°C
Resolution pH 0.01 pH
  Temperature 0.1°C
Accuracy @ 20°C pH ±0.02 pH
  Temperature ±0.5°C
Input Impedance   1012 Ohm
pH Calibration   automatic, one, two or three point, at pH 4.01, 7.01, 10.01
Temperature
Compensation
  automatic (with Pt100 probe) or manual from -9.9 to 120°C
Outputs   digital: RS232 bi-directional optoisolated; or analog, galvanically isolated: 0-1 mA, 0-20 mA and 4-20 mA, 0-5 VDC, 1-5 VDC and 0-10 VDC
Set Point Relay   1 or 2 contact outputs SPDT 5A-250 VAC, 5A-30 VDC (resistive load), fuse protected (2A, 250V fast fuse)
Alarm Relay   1 contact output SPDT, 5A-250 VAC, 5A-30 VDC (resistive load), fuse protected (2A, 250V fast fuse)
Power Supply   115 VAC ±10% or 230 VAC ±10%; 50/60 Hz
Power Consumption   15 VA
Over Current
Protection
  400 mA 250V fast fuse
Max Oscillation
Frequency
  4 MHz
Environment   0 to 50°C (32 to 122°F); RH max 95% non-condensing
Dimensions   panel cutout: 140 x 140 mm, instrument: 144 x 144 x 170 mm
Weight   1.6 kg (3.5 lb.)

{tortags,2656,3}

 

Product Information
Datasheet  Product Brochure
Manual  คู่มือ เครื่องมือวัด
HANNA Catalog  คู่มือ เครื่องมือวัด

 

 

Contact Us