0
รวม 0.00 ฿
 x 

Your shopping cart is empty!

รวม 0.00 ฿

FREE DELIVERY !

3,000 บาทขึ้นไป*

Technical Support

ทดลองสินค้าหน้าร้าน บริการหลังการขาย

OPEN ( MON-SAT )

8.00-17.30(จ-ศ) 9.00-15.30(เสาร์)

SD 300 pHSD 300 pH

SD 300 pH / Lovibond เครื่องวัด pH/Redox/Temperature

Availability: กรุณาสอบถามค่ะ

SD 300 pH / Lovibond เครื่องวัด pH/Redox/Temperature ตัวเครื่องกันน้ำตามมาตรฐาน IP67 ความละเอียดสูง
สอบถามเกี่ยวกับสินค้า
Product Tags

SD 300 pH / Lovibond

pH/Redox/Temperature Meter

Waterproof Hand-held Meters for pH/Redox/TemperatureSD 300 pH

Highlights

- Rugged, water resistant (IP 67) designed for field use
- PC interface (USB / serial or analog)
- Automatic buffer detection (SD 300 pH)
- Data logger and alarm function (min./max.)
- Good Laboratory Practice (GLP-features)
- Clear, concise result reading:
- easy-to-read backlit LCD display
- Automatic temperature compensation
- High resolution (0.001 pH / 0.1 mV) (SD 300 pH)
- Dirt-insensitive up-to-date 4-pole conductivity cell offering highest precision (SD 320 Con)

Applications

- Drinking Water
- Cooling/Boiler Water
- Waste Water
- Pool Water
- Surface Water

Features SD 300 pH

- Min / Max Value Memory highest and lowest measured value is saved.
Auto Hold freeze and display measurement.
Auto Power Off if unused, the meter automatically switches off after a selected period (0 to 120 min, or deactivated)
Additional Display for pH Electrode and Battery Bar graph display
Low Battery Display “BAT” Automatic Temperature Compensation
- Automatic Temperature Compensation (ATC) in pH mode (in the range of 0 – 105 °C) when the temperature probe is connected. Temperature can be input manually, when the temperature probe is not attached.
- pH Calibration Automatic Buffer Recognition. Permissible electrodes’ data: Asymmetry: ±55mV/Slope:45…62mV/pH The condition of pH Electrode is checked at each calibration. 1, 2 or 3 point calibration with Lovibond® Standard Buffer, DIN 19266 Buffer or any manually entered Buffer values.
- Redox Measurement (ORP) 2 options: “mV” Standard Redox or mV measurement “mVH” Conversion to hydrogen systems according to DIN38404 Part 6
- rH Measurement The rH value is calculated from a measured Redox value and a manually input pH value

Delivery Content

Order Code: 724600 SD 300 pH without electrode, with batteries, protective armouring, instruction manual, guarantee sheet
Order Code: 724610 SD 300 pH (SET 1) instrument, batteries, pH/temp. plastic-electrode type 230, pH-buffer-set (pH 4.00/7.00/10.00), in case, manual, guarantee sheet
Order Code: 724611 SD 300 pH (SET 2) as SET1, but with pH / temperature plastic-electrode type 225, temperature sensor Pt 1000, manual, guarantee sheet

Specifications

Measuring range  
pH – 2,000 … 16,000 pH
Redox /mV – 2000,0 … 2000,0 mV
Temperature – 5,0 … + 150,0 °C+ 23,0 … + 302,0 °F
rH 0,0 … 70,0 rH
Accuracy  
pH ± 0,005 pH
Redox / mV ± 0,05 % FS (mV or mVH)
Temperature ± 0,2 °C (- 5,0 … + 100,0 °C)
rH ± 0,1 rH
Connections  
pH, Redox BNC female connector, compatible to standard BNC plugs and waterproof BNC plugs, additional banana-jack (4 mm) for separate reference electrode input resistance: 1012 Ohm
Temperature 2 banana jacks (4 mm) for temperature probe (Pt1000 or NTC 10K)
Interface / Supply  4-pole bayonet connector for serial interface and supply (with accessory USB 300)
Display two 4.5 – digit seven-segment display (15 mm and 12 mm)
pH Calibration  
Automatically 1, 2 or 3 point calibration, Lovibond® Standard Buffer or Buffer to DIN19266
Manually 1, 2 or 3 point calibration
Protection class IP67 (housing and connections)
Dimensions 160 x 86 x 37 mm (H x W x D) incl. protection cover
Weight 250 g incl. battery and protective armouring
Housing impact resistant PA 6 G B30 housing with pop-up clip
Power Supply
2 x AAA-battery (included) power consumption: < 1.0 mA
Battery life 1000 hours

สินค้าราคาพิเศษ

06 กุมภาพันธ์ 2567
06 กุมภาพันธ์ 2567
11 ธันวาคม 2566

Contact Us