Product Tags
PS-200: Dual TDS Controller
Install the Dual TDS Controller to constantly monitor TDS levels of water produced by a high-output system. Immediately know if the TDS levels rise above an acceptable level.
ติดตั้งตัวควบคุม TDS แบบคู่เพื่อตรวจสอบระดับ TDS ของน้ำที่ผลิตโดยระบบสูงอย่างต่อเนื่องทันทีที่ทราบระดับ TDS เพิ่มขึ้นเหนือระดับที่ยอมรับได้
คุณสมบัติ
- ตรวจสอบและควบคุมระดับ TDS ของสองสายน้ำ (เช่น อาหารสัตว์น้ำและผลิตภัณฑ์น้ำ) สำหรับระบบเชิงพาณิชย์สูง
- จอแสดง LED ขนาดใหญ่ที่มีความสว่างสดใส
- สัญญาณเตือนภัยจะดังขึ้นหากระดับ TDS เพิ่มขึ้นสูงกว่าระดับที่ผู้ใช้ตั้งค่าสำหรับน้ำเอาท์พุท
- ติดตั้งอย่างง่ายดายในไม่กี่นาที
- มี 2 หัวเซ็นเซอร์ (ไม่มีค่าธรรมเนียมเพิ่มเติม)
- PS-200 จอภาพสำหรับสายที่ 1 (in-line) และการควบคุมสำหรับสายที่ 2 (out-line)
- ยังมีฝาครอบป้องกัน (จำหน่ายแยกต่างหาก)
ข้อมูลจำเพาะ
- ช่วง: 0 ถึง 999 ppm
- ความถูกต้อง: ±2%
- ปัจจัยการแปลง: โซเดียมคลอไรด์ NaCl (เฉลี่ย 0.5)
- ความละเอียด: 1 PPM
- ชดเชยอุณหภูมิอัตโนมัติ ATC: ใช่ (1 ถึง 65 องศาเซลเซียส)
- การสอบเทียบ: สามารถปรับได้
- การตั้งค่า: ควบคุมโดยบนหน้าจอปุ่ม ขึ้น/ลง
- รีเลย์ควบคุม: หน่วยจะเปิดหรือปิดวงจรผ่านทางติดต่อ เมื่อ ppm ระดับบริการ (สาย / สาย 2 เท่านั้น) ถึงหรือเกินควบคุมการตั้งค่า (เปลี่ยนง่ายๆ) มันสามารถใช้ในการควบคุมปั๊ม , วาล์วขดลวดแม่เหล็กไฟฟ้าหรืออุปกรณ์อื่น ๆ (ในบรรทัด / บรรทัดที่ 1 ไม่มีฟังก์ชันการควบคุม)
- รีเลย์แรงดันไฟฟ้า: 5 โวลต์ (เปลี่ยนง่ายๆ)
- จอแสดงผล: จอแสดงผล LCD 5/8" สีสันสดใส
- 2 โพรบวัด: 1/2" bushing, 3 เมตร (9.8 ฟุต) สายหุ้มฉนวน
- แหล่งจ่ายไฟ: AC 110V / AC 220V
- ขนาด: 7.2 x 7.2 x 10.2 ซม. (2.8 x 2.8 x 4 นิ้ว)
- ตรวจสอบน้ำหนัก: 476 กรัม (1 ปอนด์ 0.8 ออนซ์)
- น้ำหนักรวม: 822.1 กรัม (1 ปอนด์ 13 ออนซ์)
FEATURES
-
Monitors and controls
TDS levels of
two water lines (e.g., feed water and product water) for high output commercial systems.
-
Large, bright L.E.D. display.
-
An alarm will sound if the
TDS level rises above the user-set level for the output water.
-
Installs easily in minutes.
-
Includes two sensor probes (at no extra cost).
-
The PS-200 is a monitor for Line 1 (in-line) and a controller for Line 2 (out-line).
-
Protective cover also available (sold separately)
SPECIFICATIONS
- Range: 0 - 999ppm
- Accuracy: ±2%
- Conversion Factor: NaCl (avg. 0.5)
- Resolution: 1 PPM
- ATC: Yes (1 - 65 degrees Celsius)
- Calibration: Adjustable
- Setting: Controlled by on-screen up/down buttons
- Relay Control: The unit will open or close a circuit via dry contacts when the ppm level (out line/line 2 only)reaches or exceeds the control setting (simple switch). It can be used to control a pump, solenoid valve or other device. (In line/Line 1 does not have a control function)
- Relay Voltage: 5V (simple switch)
- Alarm: Optional steady beep for Out line/Line 2 (set by user)
- Display: Bright 5/8" L.E.D. display
- 2 Probes: 1/2" bushing, 3 meter (9.8 ft) shielded cable
- Power supply: AC 110V / AC 220V
- Dimensions: 7.2 x 7.2 x 10.2 cm (2.8 x 2.8 x 4 in.)
- Monitor Weight: 476 g (1 lb .8 oz)
- Total Weight: 822.1 g (1 lb 13 oz)