Product Tags
PS-100: Panel Mount TDS Controller
Install the Panel Mount Controller to constantly monitor TDS levels of water produced by a high-output system.
ติดตั้งแผงติดควบคุมการตรวจสอบระดับ TDS ของน้ำที่ผลิต โดยระบบสูงอย่างต่อเนื่อง
คุณสมบัติ
- ตรวจสอบ และควบคุมระดับ TDS สำหรับระบบเชิงพาณิชย์สูง
- จอแสดง LED ขนาดใหญ่ที่มีความสว่างสดใส
- สัญญาณเตือนภัยจะดังขึ้นหากระดับ TDS เพิ่มขึ้นสูงกว่าระดับที่ผู้ใช้กำหนด
- ติดตั้งอย่างง่ายดายในไม่กี่นาที
- มีโพรบเซ็นเซอร์เดียว (ไม่มีค่าธรรมเนียมเพิ่มเติม)
- นอกจากนี้ยังมีฝาครอบป้องกัน (จำหน่ายแยกต่างหาก)
ข้อมูลจำเพาะ
- ช่วง: 0 ถึง 999 ppm
- ความถูกต้อง: ±2%
- ปัจจัยการแปลง: โซเดียมคลอไรด์ NaCl (เฉลี่ย 0.5)
- ความละเอียด: 1 PPM
- ชดเชยอุณหภูมิอัตโนมัติ ATC: ใช่ (1 ถึง 65 องศาเซลเซียส)
- การสอบเทียบ: สามารถปรับได้ (คู่มือ)
- การตั้งค่า: ควบคุมโดยบนหน้าจอปุ่ม ขึ้น/ลง
- รีเลย์ควบคุม: หน่วยจะเปิดหรือปิดวงจรผ่านทางบริการการติดต่อเมื่อระดับ ppm ถึงหรือเกินควบคุมการตั้งค่า (เปลี่ยนง่ายๆ) มันสามารถใช้ในการควบคุมปั๊ม , วาล์วขดลวดแม่เหล็กไฟฟ้าหรืออุปกรณ์อื่นๆ
- รีเลย์แรงดันไฟฟ้า: 5 โวลต์
- จอแสดงผล: จอแสดงผล LCD 5/8" สีสันสดใส
- 2 โพรบวัด: 1/2" bushing, 3 เมตร (9.8 ฟุต) สายหุ้มฉนวน
- แหล่งจ่ายไฟ: AC 110V / AC 220V
- ขนาด: 7.2 x 7.2 x 10.2 ซม. (2.8 x 2.8 x 4 นิ้ว)
- ตรวจสอบน้ำหนัก: 476 กรัม (1 ปอนด์ 0.8 ออนซ์)
- น้ำหนักรวม: 680.4 กรัม (1 ปอนด์ 8 ออนซ์)
FEATURES
- Monitors and controls TDS levels for high output commercial systems.
- Large, bright L.E.D. display.
- An alarm will sound if the TDS level rises above the user-set level.
- Installs easily in minutes.
- Includes one sensor probe (at no extra cost).
- Protective cover also available (sold separately)
SPECIFICATIONS
- Range: 0 - 999ppm
- Accuracy: ±2%
- Conversion Factor: NaCl (avg. 0.5)
- Resolution: 1 PPM
- ATC: Yes (1 - 65 degrees Celsius)
- Calibration: Adjustable (manual)
- Setting: Controlled by on-screen up/down buttons
- Relay Control: The unit will open or close a circuit via dry contacts when the ppm level reaches or exceeds the control setting (simple switch). It can be used to control a pump, solenoid valve or other device.
- Relay Voltage: 5V
- Alarm: Optional steady beep (set by user)
- Display: Bright 5/8" L.E.D. display
- Probe: 1/2" bushing, 3 meter (9.8 ft) shielded cable
- Power supply: AC 110V / AC 220V
- Dimensions: 7.2 x 7.2 x 10.2 cm (2.8 x 2.8 x 4 in.)
- Monitor Weight: 476 g (1 lb .8 oz)
- Total Weight: 680.4 g (1 lb 8 oz)