Product Tags
PS-202: Dual Display TDS Controller
The PS-202 allows for continuous and simultaneous monitoring and control of TDS levels on two water lines.
PS-202 ช่วยให้การตรวจสอบอย่างต่อเนื่อง พร้อมกันและควบคุมระดับ TDS ในสายน้ำ
คุณสมบัติ
- พร้อมตรวจสอบ และควบคุมระดับ TDS ของสองสายน้ำ (เช่น อาหารสัตว์น้ำและผลิตภัณฑ์น้ำ) สำหรับระบบเชิงพาณิชย์สูง
- จอแสดงผลขนาดใหญ่ LED ที่มีความสว่างสดใส
- สัญญาณเตือนจะดังขึ้นหากระดับ TDS เพิ่มขึ้นสูงกว่าระดับที่ผู้ใช้ตั้งค่าสำหรับทั้งสองเส้น
- ติดตั้งได้อย่างง่ายดายในไม่กี่นาที
- มีสอบโพรบ 1/2" เซ็นเซอร์หัววัด (ไม่มีค่าธรรมเนียมเพิ่มเติม)
ข้อมูลจำเพาะ
- ช่วง: 0 ถึง 999 ppm
- ความถูกต้อง: ±2%
- ปัจจัยการแปลง: โซเดียมคลอไรด์ NaCl (เฉลี่ย 0.5)
- ความละเอียด: 1 PPM
- ชดเชยอุณหภูมิอัตโนมัติ ATC: ใช่ (1 ถึง 65 องศาเซลเซียส)
- การสอบเทียบ: สามารถปรับได้
- รีเลย์ควบคุม: หน่วยจะเปิดหรือปิดวงจรผ่านทางติดต่อ เมื่อ ppm ระดับผลผลิตน้ำแห้ง (บรรทัดที่ 2) หรือใส่น้ำ (บรรทัดที่ 1) ถึงหรือเกินควบคุมการตั้งค่า (เปลี่ยนง่ายๆ) การ PS-202 สามารถใช้ควบคุมหนึ่งหรือสองปั๊ม , วาล์วขดลวดแม่เหล็กไฟฟ้าหรืออุปกรณ์อื่นๆ
- รีเลย์แรงดันไฟฟ้า: 5 โวลต์
- สัญญาณเตือน: beep เสียงเตือนที่มั่นคงสำหรับทั้งสองเส้น
- จอแสดงผล: LED 5/8" ที่มีความสว่างสดใสพร้อมแสดงผลคู่
- 2 โพรบสอบสวน: 1/2″ bushing (NPT), 3 เมตร (9.8 ฟุต) สายเคเบิ้ลป้องกันฉนวน
- แหล่งจ่ายไฟ: AC 110V / 220V AC
- ขนาด: 9.4 x 9.4 x 12.5 ซม. (3.7 x 3.7 x 4.9 นิ้ว)
- ตรวจสอบน้ำหนัก: 569.8 กรัม (1 ปอนด์ , 4.1 ออนซ์)
- น้ำหนักรวม: 938.4 กรัม (2 ปอนด์ , 1.1 ออนซ์)
FEATURES
-
Simultaneously monitors and controls the
TDS levels of two water lines (e.g., the feed water and product water) for high output commercial systems.
-
Large, bright L.E.D. displays.
-
An alarm will sound if the
TDS level rises above the user-set level for both lines.
-
Installs easily in minutes.
-
Includes two 1/2" sensor probes (at no extra cost).
SPECIFICATIONS
- Range: 0 - 999ppm
- Accuracy: ±2%
- Conversion Factor: NaCl (avg. 0.5)
- Resolution: 1 PPM
- ATC: Yes (1 - 65 degrees Celsius)
- Calibration: Adjustable
- Setting: Controlled by on-screen up/down buttons
- Relay Control: The unit will open or close a circuit via dry contacts when the ppm level of the output water (line 2) or input water (line 1) reaches or exceeds its control setting (simple switch). The PS-202 can be used to control one or two pumps, solenoid valves or other device.
- Relay Voltage: 5V
- Alarm: Steady beep for both lines
- Display: Bright 5/8" L.E.D. dual displays
- 2 Probes: 1/2" bushing, 3 meter (9.8 ft) shielded cable
- Power supply: AC 110V / AC 220V
- Dimensions: 9.4 x 9.4 x 12.5 cm (3.7 x 3.7 x 4.9 in.)
- Monitor Weight: 569.8 g (1 lb 4.1 oz)
- Total Weight: 938.4 g (2 lbs 1.1 oz)