Product Tags
HI96735 HANNA Total Hardness Meter
เครื่องวัดความกระด้างของน้ำ
ความกระด้างของน้ำ,EPA,โฟโตมิเตอร์แบบพกพา
- - CAL CHECK ™
- - การสอบเทียบด้วยตัวเอง
- - ได้รับการรับรองมาตรฐานการสอบเทียบและการตรวจสอบ
- - BEPS (ระบบป้องกันข้อผิดพลาดของแบตเตอรี่)
- - ฟังก์ชั่น TIMER
- - ปิดอัตโนมัติ
- - คุณสมบัติ GLP
คุณสมบัติ
- - ความกระด้างของน้ำทั้งหมดนั่นคือ การมีแมกนีเซียมและแคลเซียมส่วนใหญ่ เกิดจากของเหลวที่ไหลออกจากน้ำ ละลายเป็นเกลือเมื่อไหลหรือกรองผ่านชั้นต่าง ๆ ความกระด้างของน้ำอาจทำให้เกิดการปรับขนาดของท่อในระบบทำความเย็น และระบบทำความร้อน
- - HI 93735 วัดค่าความกระด้างทั้งหมดในน้ำดื่ม พื้นผิว และน้ำเสีย
- - เครื่องวัดนี้ใช้ระบบล็อคเฉพาะ เพื่อให้แน่ใจว่าคิวเวต อยู่ในตำแหน่งเดิมทุกครั้งที่วางลงในเซลล์วัด ออกแบบมาเพื่อให้พอดีกับคิวเวต ที่มีคอที่ใหญ่ขึ้นทำให้ง่ายต่อการเพิ่มทั้งตัวอย่าง และรีเอเจนต์
- - คิวเวตทำจากกระจกออปติคอลพิเศษเพื่อให้ได้ผลลัพธ์ที่ดีที่สุด
ข้อมูลการสั่งซื้อ:
HI 96735 มาพร้อมกับคูเวตตัวอย่าง พร้อมฝาปิด (2) แบตเตอรี่ 9V และคู่มือการใช้งาน
สเปคของเครื่อง
- - ช่วงการวัด : LR 0 to 250 mg/L; MR 200 to 500 mg/L; HR 400 to 750 mg/L
- - ความละเอียด : 1.0 mg/L from 1 to 100 mg/L; 5.0 mg/Lfrom 100 to 750 mg/L
- - ความแม่นยำ : LR ±5mg/L ±4% of reading@ 25°C; MR ±7 mg/L ±3% of reading@ 25°C; HR ±10 mg/L ±2% of reading@ 25°C
- - แหล่งกำเนิดแสง : ไดโอดเปล่งแสง
- - เครื่องตรวจจับแสง : ตาแมวซิลิคอนพร้อมตัวกรองสัญญาณรบกวนวงแคบที่ 466 นาโนเมตร
- - วิธี : การปรับตัวของ EPA วิธีที่แนะนำ 130.1
- - สิ่งแวดล้อม : 0 ถึง 50 °C (32 ถึง 122 °F); สูงสุด 95% RH ไม่กลั่นตัว
- - ประเภทแบตเตอร์รี่ : แบตเตอร์รี่ 9V
- - ปิดอัตโนมัติ : หลังจาก 10นาทีของการไม่ใช้งานในโหมดการวัด หลังจากไม่ใช้งาน 1ชั่วโมงในโหมดสอบเทียบ พร้อมการแจ้งเตือนการอ่านครั้งล่าสุด
- - ขนาด : 192 x 104 x 69 mm (7.6 x 4.1 x 2.7 นิ้ว)
- - น้ำหนัก : 360 กรัม (12.7 ออนซ์)
HI96735 HANNA Hardness, EPA, Portable Photometer
- - CAL CHECK™
- - User calibration
- - Certified calibration and verification standards
- - BEPS (Battery Error Prevention System)
- - TIMER function
- - Auto shut-off
- - GLP Features
Features
- - Total hardness, that is the presence of magnesium and calcium, is due mainly to the runoff water dissolving these salts as it flows or filters through different strata. Hardness can also cause scaling of pipes in cooling and heating systems.
- - The HI 93735 measures the total hardness in drinking, surface and wastewater.
- - This meter uses an exclusive positive-locking system to ensure that the cuvette is in the same position every time it is placed into the measurement cell. It is designed to fit cuvettes with a larger neck making it easier to add both sample and reagents.
- - The cuvettes are made from special optical glass to obtain best results.
Order Information:
HI 96735 is supplied with sample cuvettes with caps (2), 9V battery and instruction manual.
Specifications
Range |
LR 0 to 250 mg/L; MR 200 to 500 mg/L; HR 400 to 750 mg/L |
Resolution |
1.0 mg/L from 1 to 100 mg/L; 5.0 mg/Lfrom 100 to 750 mg/L |
Accuracy |
LR ±5mg/L ±4% of reading@ 25°C; MR ±7 mg/L ±3% of reading@ 25°C; HR ±10 mg/L ±2% of reading@ 25°C |
Light Source |
light emitting diode |
Light Detector |
Silicon photocell with narrow band interference filter @ 466 nm |
Method |
Adaptation of the EPA recommended method 130.1. |
Environment |
0 to 50°C (32 to 122°F); max 95% RH non-condensing |
Power Supply |
9V battery |
Auto-Shut off |
after ten minutes of non-use in measurement mode; after one hour of non-use in calibration mode; with last reading reminder |
Dimensions |
192 x 104 x 69 mm (7.6 x 4.1 x 2.7") |
Weight |
360 g (12.7 oz.) |
Solutions |
HI 93703-50 |
Cuvette Cleaning Solution |
Accessories |
HI 731331 |
Glass Cuvette Set |
HI 731335 |
Cuvette Cap for HI 957xx Series Meters |
Reagents & Standards |
HI 93735-00 |
Hardness, Total, Colorimetric Method (100 Tests) |
HI 93735-01 |
Hardness, Total, Colorimetric Method (100 Tests) |
HI 93735-02 |
Hardness, Total, Colorimetric Method (100 Tests) |
HI 93735-0 |
Hardness, Total, Colorimetric Method (100 Tests) |
HI 96735-11 |
CAL CHECK™ standard cuvettes |