Your shopping cart is empty!
Availability: กรุณาสอบถามค่ะ
Universal Moisture Meter Type DM4A for Wood & Construction Materials, Paper & Cardboard and Others
Universal Moisture Meter Type DM4A for Wood & Construction Materials, Paper & Cardboard and Others
digital hand held instrument with capacitive measuring principle
measuring range | 0,0 - 99,9 % H2O (adjustable) |
resolution: | 0,1% |
dimension: | approx. 180 x 80 x 35 mm |
weight: | approx. 0,25 kg |
non-destructive measurements - done in seconds- just press it on the material and read off the average moisture content till a depth of approx. 3 cm
material group setting by means of a membrane-type keypad
the adjusted material group can always be seen in the display
microprocessor controlled measring with automatic zero point correction
up to 10 customer specific linearisation curves with 8 points each possible
storage for 100 moisture values
automatic calculation of maximum, average and minimum value
the instrument works with a standard 9V blockbatterv, we strongly recommend the lithium battery type U9VL with at least 30 hours using time and at least 10 years lifetime without using
for testing and calibrating we recommend our test modules PE05 & PE30
Optional:
software DMI-Controller inc. RS232 interface cable for PC
calibration in connection with the test modules PE05 and PE30
changing of customer specific calibration curves, the curves can be stored on the hard disc
changing of measuring parameters
measurements can be transfered permanently to the PC, the values will be displayed graphicaly and can be stored on the hard disc
stored values in the instrument can be transfered to the PC, the values will be displayed graphicaly and can be stored on the hard disc