0
รวม 0.00 ฿
 x 

Your shopping cart is empty!

รวม 0.00 ฿

FREE DELIVERY !

3,000 บาทขึ้นไป*

Technical Support

ทดลองสินค้าหน้าร้าน บริการหลังการขาย

OPEN ( MON-SAT )

8.00-17.30(จ-ศ) 9.00-15.30(เสาร์)

Fluke 805FCFluke 805FC

Fluke 805FC / Fluke Vibration Meter with Fluke Connect

Availability: กรุณาสอบถามค่ะ

Fluke 805FC / Fluke Vibration Meter with Fluke Connect Innovative sensor design minimizes measurement variations caused by device angle or contact pressure.Consistent data quality at both low and high frequency ranges.
สอบถามเกี่ยวกับสินค้า
Product Tags

Fluke 805FC : Vibration Meter with Fluke Connect

 Fluke 805FC

Features

  • Innovative sensor design minimizes measurement variations caused by device angle or contact pressure
  • Consistent data quality at both low and high frequency ranges
  • Four-level severity scale assesses urgency of problems for overall vibration and bearing condition
  • Exportable data via USB
  • Trending in Microsoft® Excel using built-in templates
  • Units of measurement: Acceleration: g, m/sec2; Velocity: in/sec, mm/sec; Displacement: mils, mm
  • Crest Factor+ technology provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
  • Coloured lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements
  • Temperature measurement with Spot IR Sensor increases diagnostic capabilities
  • On-board memory holds and saves up to 3,500 measurements
  • Audio output for listening to bearing tones directly
  • External accelerometer support for hard to reach locations
  • Flashlight for viewing measurement locations in dark areas
  • Large screen with high resolution for easy navigation and viewing

 

Specifications

  • Low Frequency Range (overall measurement) : 10 to 1,000 Hz
  • High Frequency Range (CF+ measurement) : 4,000 to 20,000 Hz
  • Severity Levels : Good, satisfactory, unsatisfactory, unacceptable
  • Vibration Limit : 50g peak (100g peak-peak)
  • A/D Converter : 16-bit
  • Signal to Noise Ratio : 80 dB
  • Sampling Rate : Low frequency: 20,000 Hz
  • High frequency : 80,000 Hz
  • Real Time Clock Backup : Coin battery
  • Sensor
  • Sensitivity : 100mV g ±10%
  • Measurement Range : 0.01 to 50g
  • Low Frequency Range (overall measurement) : 10 to 1,000 Hz
  • High Frequency Range : 4,000 to 20,000 Hz
  • Resolution : 0.01g
  • Accuracy : At 100Hz ±5% of measured value
  • Amplitude Units
  • Acceleration : g, m/sec2
  • Velocity : in/sec, mm/sec
  • Displacement : mils, mm
  • IR Temperature Measurements
  • Range : -20 to 200°C (-4 to 392°F)
  • Accuracy : ±2°C (4°F)
  • Focal Length : Fixed, at ~3.8 cm (1.5 in)
  • External Sensor
  • Frequency Range : 10 to 1,000 Hz
  • Bias Voltage 
  • (to supply power) : 20V DC to 22V DC
  • Bias Current (to supply power) : Maximum 5 mA

สินค้าราคาพิเศษ

06 กุมภาพันธ์ 2567
06 กุมภาพันธ์ 2567
11 ธันวาคม 2566

Contact Us

Copyright © 2015 ponpe.com. All Rights Reserved.
การจ่ายเงิน