MH180 MITECH เครื่องวัดความแข็ง Hardness Tester

กลับไปที่: Leeb Hardness Tester

25,200.00 ฿

| Add Your Review

Availability: กรุณาสอบถามค่ะ

MITECH

MH180 MITECH เครื่องวัดความแข็ง Hardness Tester ขนาดกะทัดรัดเหมาะสำหรับงานภาคสนาม ช่วงการวัดกว้าง

สอบถามเกี่ยวกับสินค้า

Full Description

Product Tags

mh180 mitech เครื่องวัดความแข็ง hardness tester hardness meter

เครื่องวัดความแข็ง MH180

Hardness Tester

Product Description

1 Compact plastic case, suitable for use under poor working conditions. Test at any angle, even upside down.
2 Wide measuring range. It can measure the hardness of all metallic materials.
3 Direct display of hardness scales HRB, HRC, HV, HB, HS, HL
4 Large screen (segment LCD), showing all functions and parameters. With EL background light.
5 Large capacity memory could store 100 groups information.
6 Datapro Software to connect with PC via RS232 port. Micro printer support
7 Software calibration function.

Technical Specifications

Working Voltage	3V(two AA size, alkaline batteries)
Power supply	Two ordinary AA batterie
Measuring range	（170～960）HLD
Impact direction	vertically downward, oblique, horizontal, oblique, vertical upward, automatically identify
Error	D,±6 HLD
Repeatability	D,6 HLD
Material	Steel and cast steel,Cold work tool steel,Stainless steel,Grey cast iron,Nodular cast iron,Cast alu
Hardness Scale	HL、HB、HRB、HRC、HRA、HV、HS
Impact energe	D----11mJ
Impact weight	D----5.5g/7.2g
Impact ball hardness	D----1600HV
Impact ball diameter	D----3mm
Impact ball material	D----Tungsten carbide
Sample surface roughness	D----1.6μm；C----0.4μm
Min depth of harness layer	D----≥0.8mm；C----≥0.2mm
Display	High-contrast Segment LCD
Storage	100 measurement series.(Relative to average times 32～1)
Calibration	Single-point calibration
Data printing	Thermal printing on site
Power consumption	Low-power design
Standby period	About 100h（without backlight）
Commumication port	USB1.1
Working language	English
Shell material	ABS plasic
Dimensions	150mm×74mm×32 mm
Weight	4.0KG
PC software	None

Main Application

1 Die cavity of molds
2 Bearings and other parts
3 Failure analysis of pressure vessel, steam generator and other equipment
4 Heavy work piece
5 The installed machinery and permanently assembled parts.
6 Testing surface of a small hollow space
7 Material identification in the warehouse of metallic materials
8 Rapid testing in large range and multi-measuring areas for large-scale work piece

Standard Configuration

- Main unit
- D type impact device 1 With cable
- Standard test block
- Cleaning brush (I)
- Small support ring
- Alkaline battery: AA*2
- Manual
- Instrument package case

Optional Configuration

- Cleaning brush (II): For use with G type impact device
- Other type of impact devices and support rings: Refer to Table 3 and Table 4 in the appendix.
- DataPro software
- Communication cable
- Micro Printer
- Print cable