Your shopping cart is empty!
Availability: กรุณาสอบถามค่ะ
Advantage:
1. Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL and three types of strength values immediately.
2. Large screen LCD, showing all functions and parameters. With EL background light.
3. Seven impact devices are available for special application. Automatically identify the type of impact devices, and with the user calibration function.
4. Test at any angle, even upside down.
5. Large memory could store 100 groups (Relative to average times 32~1 ) information including single measured value, mean value, impact direction, impact times, material and hardness scale etc.
6. Battery information showing the rest capacity of the battery and the charge status.
7. Original imported high speed thermal printer support the immediate printing function.It can save data permanently.
8. NI-MH rechargeable battery as the power source. Charge circuit integrated inside the instrument. Continuous working period of no less than 150 hours (EL off and no printing).
9. Auto power off to save energy.
Application:
1. Die cavity of molds
2. Bearings and other parts
3. Failure analysis of pressure vessel, steam generator and other equipment
4. Heavy work piece
5. The installed machinery and permanently assembled parts
6. Testing surface of a small hollow space
7. Material identification in the warehouse of metallic materials
8. Rapid testing in large range and multi-measuring areas for large-scale work piece
Specification:
Measuring range | (170~960)HLD |
Impact direction | vertically downward, oblique, horizontal, oblique, vertical upward, automatically identify |
Error | D,±6 HLD |
Repeatability | D,6 HLD |
Material | Steel and cast steel,Cold work tool steel,Stainless steel,Grey cast iron,Nodular cast iron,Cast alu |
Hardness Scale | HL、HB、HRB、HRC、HRA、HV、HS |
Impact energe | D----11mJ |
Impact weight | D----5.5g/7.2g |
Impact ball hardness | D---1600HV |
Impact ball diameter | D----3mm |
Impact ball material | D----Tungsten carbide |
Sample surface roughness | D----1.6μm;C----0.4μm |
Min depth of harness layer | D≥0.8mm;C≥0.2mm |
Display | High-contrast Segment LCD |
storage | 100 measurement series.(Relative to average times 32~1) |
Calibration | Single point calibration |
Data printing | Print the test report |
Power voltage | 6V( Ni-MH battery pack) |
Power supply | 9V/500mA;recharge for 2.5~3.5h |
Power consumption | Lowe power design |
Standby period | about 150 hours(with default brightness) |
Commumication port | USB1.1 |
Working language | English |
Shell material | ABS engineering plastic |
Dimension | 212mm×80mm×32mm |
Total weight | 5.5KG |
Product Information | |
Datasheet | |
Manual | |
MITECH Catalog |