Your shopping cart is empty!
Availability: กรุณาสอบถามค่ะ
Introduction:
1. With the Leeb hardness measuring principle, the pen-type hardness tester MH100 can do test easily and quickly to various metallic material.
2. It can show the hardness measuring value immediately and can switch to other scales freely.
Specification:
Measuring range | (170~960)HLD |
Impact direction | vertically downward, oblique, horizontal, oblique, vertical upward, automatically identify |
Error | Impact device D:±6HLD |
Repeatability | Impact device D:±6HLD |
Material | Steel and cast steel,Cold work tool steel,Stainless steel,Grey cast iron,Nodular cast iron,Cast alum |
Hardness Scale | HL、HB、HRB、HRC、HRA、HV、HS |
Min depth for harden layer | D≥0.8mm;C≥0.2mm |
Display | High-contrast Segment LCD |
Storage | up to 100 groups(Relative to average times 32~1) |
Calibration | SIngle point calibration |
Data printing | Connect PC to print |
Working voltage | 3.7V(Built-in lithium polymer battery) |
Power supply | 5V/500mA;recharge for 2.5~3.5 h |
Standby period | About 200h(without backlight) |
Communication interface | USB1.1 |
Working language | Chinese |
Shell meterial | ABS engineering plastic |
Dimensions | 148mm×33mm×28 mm |
Total weight | 4.0KG |
PC software | Yes |
Standard Accessories:
1. Main Unit 1
2. Cleaning brush 1
3. Small support ring 1
4. Standard block 1
5. Dataproceeding Software with Cable 1
6. Accompany documents (including manual, quality certifcate, warranty card and packing list ) 1 set
7. ABS instrument case 1
Product Information | |
Datasheet | |
Manual | |
MITECH Catalog |