Your shopping cart is empty!
Availability: กรุณาสอบถามค่ะ
Description
- Small volume with light weight, it is convenient for taking.
- Test at any angle, even upside down.
- Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL and three types of strength values immediately.
- Large capacity memory could store 500 groups (Relative to average times 32~1 ) information including single measured value, mean value, testing data, impact direction, impact times, material and hardness scale etc.
- Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.
- Battery information indicates the rest capacity of the battery and the charge status.
- User calibration function.
- USB port with the PC humanity multi-functions data proceeding software.
- Original imported high speed thermal printer support the immediate printing function. It can save data permanently.
- Auto power off to save energy.
- Easy to buy and comfortable to use.
Specifications
Measuring range | (170~960)HLD |
Impact direction | vertically downward, oblique, horizontal, oblique, vertical upward, automatically identify |
Error | D,±6 HLD |
Repeatability | D,6 HLD |
Material | Steel and cast steel,Cold work tool steel,Stainless steel,Grey cast iron,Nodular cast iron,Cast alu |
Hardness Scale | HL、HB、HRB、HRC、HRA、HV、HS |
Impact energe | D----11mJ |
Impact weight | D----5.5g/7.2g |
Impact ball hardness | D----1600HV |
Impact ball diameter | D----3mm |
Impact ball material | D----Tungsten carbide |
Sample surface roughness | D----1.6μm;C----0.4μm |
Min depth of harness layer | D≥0.8mm;C≥0.2mm |
Display | 128×64 dots, adjustable backlight |
Storage | 500 measurement series.(Relative to average times 32~1) |
Calibration | Single-point calibration |
Data printing | Thermal printing on site |
Power voltage | 6V Ni-MH battery pack |
Power supply | 9V/500mA |
Power consumption | Low-power design |
Standby period | About 150 hours(with default brightness) |
Commumication port | USB1.1 |
Working language | English |
Shell material | ABS plasic |
Dimensions | 212mm×80mm×32mm |
Weight | 5.5KG |
Standard Configuration
- Main Unit
- D type impact device With cable
- Standard test block
- Cleaning brush (I)
- Small support ring
- Battery Charger 9V 500mA
- Paper for printing
- Manual
- Instrument case
Product Information | |
Datasheet | |
Manual | |
MITECH Catalog |