Your shopping cart is empty!
Availability: กรุณาสอบถามค่ะ
The DS1922L temperature logger iButtons are rugged, self-sufficient systems that measure temperature and record the result in a protected memory section. The recording is done at a user-defined rate. A total of 8192 8-bit readings or 4096 16-bit readings taken at equidistant intervals ranging from 1s to 273hrs can be stored. In addition to this, there are 512 bytes of SRAM for storing application-specific information and 64 bytes for calibration data. A mission to collect data can be programmed to begin immediately, or after a user-defined delay or after a temperature alarm. Access to the memory and control functions can be password protected. The DS1922L is configured and communicates with a host computing device through the serial 1-Wire protocol, which requires only a single data lead and a ground return. Every DS1922L is factory-lasered with a guaranteed unique 64-bit registration number that allows for absolute traceability. The durable stainless-steel package is highly resistant to environmental hazards such as dirt, moisture, and shock. Accessories permit the DS1922L to be mounted on almost any object, including containers, pallets, and bags.
iButton Size
|
F5 - 5mm
|
Operating Temperature
|
-40°C to +85°C
|
Temperature Accuracy
|
± 0.5°C: -10°C to +65°C
|
Temperature Resolution
|
Programmable: 0.0625°C to 0.5°C
|
Log Memory Size
|
8K Bits
|
Memory Type
|
NV SRAM
|
Logging Rate
|
Programmable: 1 sec to 273 hrs
|
General Purpose Memory
|
512 Bytes Read/Write
|
Logging Capacity
|
4096 - 8192 Readings, Depending on Resolution
|
Battery Life
|
Up to 7 years
|
Shelf life with battery installed
|
10+ years
|
Family Code
|
0x41
|
Unique ID
|
Yes - Factory Set 64 Bit Serial #
|
Intrinsically Safe
|
Yes
|
Alarm Support
|
High/Low Temperature Alarms
|
{tortags,1623,3}