Your shopping cart is empty!
Availability: กรุณาสอบถามค่ะ
Features:
Fluke combined the DMM you trust with the loop calibrator you need.
The Fluke 787 ProcessMeter™ puts a complete troubleshooting solution in the palm of your hand. Get in touch with more information, faster and easier with the newest member of the Fluke 80 Series, the 787 ProcessMeter. The 787 gives you the measurement capabilities you expect from our rugged, reliable DMMs plus the ability to source, simulate, or measure dc current with 1 microamp resolution and accuracy of 0.05%. Put it all together and you have the ideal tool for troubleshooting and calibrating current loop applications. So if you're tired of always tracking down a calibrator, lugging around two tools and switching back and forth, get the single best solution for doubling your power. The 787 ProcessMeter from Fluke.Here's the power the 787 ProcessMeter™ puts into your hands.
Precision 1000V, 440 mA digital multimeter
DC current source/loop calibrator
Safety Conformance
Meets 1000 volt EN61010-1 CAT III standards.
Specifications | ||
Current measurement | Range: | 0-1 A |
Resolution | 1 mA | |
Accuracy: | 0.2% + 2 LSD | |
Range: | 0-30 mA | |
Resolution: | 0.001 mA | |
Accuracy: | 0.05% + 2 LSD | |
Current sourcing | Range: | 0-20 mA or 4-20 mA |
Resolution: | 0.05% of span | |
Drive Capability: | 500 Ω @ 24 mA | |
Frequency | To 19.999 kHz, 0.005% + 1 LSD | |
Continuity | Beeps for resistance < 100 ohms | |
Voltage measurement | Range: | 0-1000 V AC or DC |
Resolution: | 0.1 mV to 1.0 V | |
Accuracy: | 0.1% Rdg + 1 LSD (VDC) | |
Resistance measurement | To 40 MΩ, 0.2% + 1 LSD | |
Diode test | 2.4 V shows diode voltage drop | |
Environmental Specifications | ||
Operating temperature | -20 ºC to 55 ºC | |
Storage temperature | -40 ºC to 60 ºC | |
Humidity (without condensation) | 95% up to 30 ºC | |
75% up to 40 ºC | ||
45% up to 50 ºC | ||
35% up to 55 ºC | ||
Temperature coefficient | 0.05 x (specified accuracy) per ºC (for temperatures < 18 ºC or > 28 ºC) | |
Safety Specifications | ||
Electrical safety | Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No. 1010.1-92 | |
Overvoltage category | IEC 1010-1 CAT III | |
Maximum voltage | 1000 V rms | |
Mechanical & General Specifications | ||
Size | 32 x 87 x 187 mm | |
Weight | 369 g | |
Batteries | Single 9V Alkaline battery (ANSI/NEDA 1604A or IEC 6LR61) | |
Warranty | 3 years | |
Battery life | 50 hours typical (measurement), 12 hours typical (sourcing 12 mA) | |
Shock & vibration | Random, 2g, 5-500 Hz | |
1 meter drop test | ||
Display current and % of span | Yes | |
Auto step, auto ramp | Yes |
{tortags,2382,3}