HT-10 / JEDTO เครื่องวัดความแข็ง อลูมิเนียม Barcol Impressor

Features:

1.Easy to Use: Single hand operation; easy to use high efficiency able to make test at any site.

2.High Sensitivity: Barcol Impressor has 100 graduations. Its sensitivity is much higher than the Webster hardness tester.

3.Wide Testing Range: Used to test from very soft pure aluminum to very hard aluminum alloys.

4.Less Thickness Requirement: It can test on any workpieces with thickness more than 0.8mm.

5.No Supporting Required: It can test from only one side of the workpiece. It is unnecessary to move or support the workpiece. It is used to test very large and thick workpieces and assembly parts.

6.Easy Conversion: The test results can be converted to HB, HR, HV and HW easily through the conversion table.

7.High Quality Indenter: The indenter has very high hardness, long service life and good interchangeability

Technical Parameter:

1. Testing Range: 0 ~ 100HBa (equivalent to 25 ~ 145HBW)

2. Resolution: 0.5HBa

3. Indication Error: ±2HBa (42 ~ 48HBa); ±1HBa (81 ~ 88HBa)

4. Repeatability Error: ±2HBa (42 ~ 48HBa); ±1HBa (81 ~ 88HBa)

5. Net Weight: 0.5 kg
 

Standard Assembly

1. 2 Spare indenters

2. Standard hardness block (high)

3. Standard hardness block (low)

4. Calibration wrench

5. Leg

6. Carrying case
 

Optional Accessories

1. Spare indenters

2. Standard hardness block (high / low)

3. Dial glass

4. Flat leg