3,000 บาทขึ้นไป* ส่งฟรี KERRY

Technical Support

ทดลองสินค้าหน้าร้าน บริการหลังการขาย


8.00-17.30(จ-ศ) 9.00-15.30(เสาร์)

WNE 45 / MEMMERT อ่างน้ำร้อน WATERBATH

Availability: กรุณาสอบถามค่ะ

Waterbath WNE 45 สแตนเลสทนการกัดกร่อน อิเล็กทรอนิกส์ที่มีความแม่นยำและการป้องกันอุณหภูมิหลายระดับ มีความปลอดภัยสูง
Product Tags

อ่างน้ำร้อน รุ่น WNE 45

Standard delivery Waterbath


On this page, you can find all the essential technical data on the Memmert water bath. Our customer relations team will be pleased to help if you want further information. If you should require a customised special solution, please contact our technical specialists at This email address is being protected from spambots. You need JavaScript enabled to view it. .


Temperature range in °C min. 5°C above ambient up to +95°C with additional boiling mode (+100°C)
resolution of display and setting accuracy 0,1°C up to +99,9°C / 1°C from 100°C
Control of standard components  
Controller digital display (LED) of all set parameters, such as temperature and alarm values (0,1°C resolution) as well as time values
Timer digital timer from 1 min. up to 999 hours for: ON (continuous operation), DELAYED ON, HOLD or HOLD set-temperature dependent with guaranteed holding time
Calibration on controller
Temperature control 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
Temperature control mechanical temperature limiter TB protection class 1 switching the heating off at approx. 30°C above max. temperature of the bath
Temperature control independently working, electronic overtemperature controller TWW protection class 3.1 or overtemperature limiter TWB protection class 2, adjustable in set-up menu by customer
Temperature control in case of overtemperature due to failure, the heating is switched off at approx. 10°C above the set temperature (fixed value)
Autodiagnostic system fuzzy-supported PID microprocessor controller with integrated autodiagnostic system with fault indication
Alarm visual and acoustic alarm at programme end and as input acknowledgement as well as in case of low liquid level, heating is switched off automatically
Heating concept  
Heating Baths corrosion-proof large-area heating on three sides
Stainless steel interior
Dimensions W x H x D in mm w(A) x h(C) x d(B): 590 x 350 x 220 mm
Interior easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing, material no. 1.4301 (ASTM 304), laser-welded
Volume 45 l
Liquid level min. (H) 177 mm
Liquid level max. (I) 200 mm
Textured stainless steel casing  
Dimensions w(D) x h(G) x d(E): 818 x 516 x 296 mm
Electrical data  
Voltage 230 V, 50/60 Hz
Electrical load approx. 2800 W (during heating)
Packing/shipping data/Setting Up  
Installation The vent openings in the left and back side must remain unobstructed. Minimum wall spacing on all sides is 80 mm. The minimum spacing from the top of the bath to the next ceiling is 750 mm.
Transport information The appliances must be transported upright
Customs tariff number 8419 8998
Country of origin Federal Republic of Germany
WEEE-Reg.-No. DE 66812464
Dimensions approx incl. carton B x H x T: 910 x 610 x 460 mm
Net weight approx. 26 kg
Gross weight carton approx. 33 kg

Contact Us