IN55 / Memmert ตู้บ่มเชื้อ ตู้เพาะเชื้อ Incubator

กลับไปที่: Incubator

99-1,000.- อาจเปลี่ยนแปลง กรุณาสอบถาม

| Add Your Review

Availability: กรุณาสอบถามค่ะ

Memmert

Incubator IN55 ตู้บ่มเพาะเชื้อ สามารถใช้ในการวิจัยการแพทย์ ยา เภสัชกรรม และการวิเคราะห์อาหาร รวมทั้งเคมีอาหาร

สอบถามเกี่ยวกับสินค้า

Full Description

Product Tags

memmert ตู้บ่มเชื้อ ตู้เพาะเชื้อ incubator in55

ตู้บ่มเชื้อ ตู้เพาะเชื้อ รุ่น IN55

Standard delivery Incubator

The heating of this incubator is optimally tuned for both natural convection and forced air circulation; the fan can also be switched off completely, and valuable chamber loads for research, pharmaceutics, medicine and food chemistry are warmed up very carefully.

On this page, you can find all the essential technical data on our incubator. Our customer relations team will be pleased to help if you want further information. If you should require a customised special solution, please contact our technical specialists at This email address is being protected from spambots. You need JavaScript enabled to view it..

Properties
Temperature
Set temperature range in °C	min. 5°C above ambient up to +80°C
Setting accuracy temperature	0.1°C
Temperature	1 Pt100 sensor DIN class A in 4-wire-circuit
Control technology
Language setting	German, English, Spanish, French, Polish, Czech, Hungarian
ControlCOCKPIT	SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	the process time does not start until the set temperature is reached
Calibration	three freely selectable temperature values
adjustable parameters	temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime
Ventilation
Convection	natural convection
Fresh air admixture	adjustment of pre-heated fresh air admixture by air flap control in 10 % steps
Vent	vent connection with restrictor flap
Communication
Documentation	programme stored in case of power failure
Programming	AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).
Safety
Temperature control	adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
Autodiagnostic system	for fault analysis
Standard equipment
Internals	1 stainless steel grid(s), electropolished
Works calibration certificate	incl. works calibration certificate for +37°C
Door	fully insulated stainless steel door with 2-point locking (compression door lock)
Door	inner glass door
Stainless steel interior
Interior	easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Volume	53 l
Dimensions W x H x D in mm	w(A) x h(B) x d(C): 400 x 400 x 330 mm
Max. number of internals	4
Max. loading of chamber	80 kg
Max. loading per internal	20 kg
Textured stainless steel casing
Dimensions	w(D) x h(E) x d(F): 585 x 784 x 514 mm
Housing	rear zinc-plated steel
Electrical data
Voltage Electrical load	230 V, 50/60 Hz
Voltage Electrical load	approx. 1000 W
Voltage Electrical load	115 V, 50/60 Hz
Voltage Electrical load	approx. 900 W
Packing/shipping data/Setting Up
Set Up	The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.
Transport information	The appliances must be transported upright
Customs tariff number	8419 8998
Country of origin	Federal Republic of Germany
WEEE-Reg.-No.	DE 66812464
Dimensions approx incl. carton	B x H x T: 730 x 950 x 670 mm
Net weight	approx. 57 kg
Gross weight carton	approx. 76 kg