Your shopping cart is empty!
Availability: กรุณาสอบถามค่ะ
The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Each unit features a user selectable set-point. An LED visual alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point.
All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration solution.
TDS - PPM Monitor
SPECIFICATIONS | |
Range | 0 - 1990 ppm |
Resolution | 10 ppm |
Accuracy | ±2% Full Scale |
Setpoint range | 700 - 1800 ppm |
Conversion Factor | 0.7 |
Alarm | Active when reading is higher or lower than set point |
Temerature Compensation | automatic; from 5 to 50 oC |
Probe | MA812/2 (included) |
Environment | 0 to 50 oC / 32 to 122 oF; max RH 95% |
Power Supply | 12 VDC adapter (included) |
Dimensions | 148,5 x 82,5 x 32 mm |
Weight | 180 g (meter only) |
ACCESSORIES | |
M10031B | 1413 µS/cm calibration solution, 20 ml sachet (25 pcs) |
M10032B | 1382 ppm calibration solution, 20 ml sachet (25 pcs) |
M10039B | 5.00 mS/cm calibration solution, 20 ml sachet (25 pcs) |
M10442B | 1500 ppm calibration solution, 20 ml sachet (25 pcs) |
ORDERING INFORMATION | |
MC410 is supplied with 12 VDC adapter, mounting kit, and 20ml 1382ppm calibration solution. |
Product Information | |
Datasheet | |
Manual | |
Milwaukee Catalog |