Your shopping cart is empty!
Availability: กรุณาสอบถามค่ะ
Highlights
- Rugged, water resistant (IP 67) designed for field use
- PC interface (USB / serial or analog)
- Automatic buffer detection (SD 300 pH)
- Data logger and alarm function (min./max.)
- Good Laboratory Practice (GLP-features)
- Clear, concise result reading: easy-to-read backlit LCD display
- Automatic temperature compensation
- High resolution (0.001 pH / 0.1 mV) (SD 300 pH)
- Dirt-insensitive up-to-date 4-pole conductivity cell offering highest precision (SD 320 Con)
Applications
- Drinking Water
- Cooling/Boiler Water
- Waste Water
- Pool Water
- Surface Water
Features SD 320 Con
- Min / Max Value Memory highest and lowest measured value is saved
- Auto Hold freeze and display measurement
- Auto Power Off if unused, the meter automatically switches off after a selected period (0 to 120 min, or deactivated)
- Low Battery Display “BAT”
- Automatic temperature compensation As conductivity depends strongly on temperature, each conductivity value is only valid at the corresponding temperature. Therefore the device supports temperature compensation, i.e. referring the conductivity to a reference temperature (selectable: 20 °C or 25 °C).
- Salinity measurement Salinity means the sum of amount of all dissolved salts in water. The unit is g / kg.
- TDS measurement (total dissolved solids) TDS means the mass concentration of dissolved media in a liquid. The unit is mg/l.
Delivery Content
Order Code: 72 47 00 SD 320 Con (SET 1) instrument, batteries, conductivity cell LC 12 (measuring range 0 – 200 mS), manual, guarantee sheet in case
Order Code: 72 47 20 SD 320 Con (SET 2) instrument, batteries, conductivity cell LC 16 (measuring range 0 – 1000 mS), manual, guarantee sheet in case
Measuring ranges | |
Number | 5 |
Smallest range | 0,000 … 5,000 μS / cm or 0,0 … 500,0 μS / cm ** |
biggest range | 0 … 5000 μS / cm * or 0 … 1000 mS / cm ** |
Resistivity
|
0.005 … 500.0 kOhm / cm (depends on cell constant)
|
TDS |
0 … 5000 mg/l (depends on cell constant)
|
Salinity |
0.0 … 70.0 (g salt / kg water equals PSU = Practical Salinity Unit)
|
Temperature |
– 5.0 … + 100.0 °C, Pt1000 or NTC (10 kOhm)
|
Supported cell constants
|
4,000 … 15,000 / cm-1 0,4000 … 1,5000 / cm-1 0,04000 … 0,15000 / cm-1 0,004000 … 0,015000 / cm-1 |
Accuracy | |
Conductivity
|
± 0.5 % of reading
± 0.1 % FS (depends on electrode) |
Temperature | ± 0,2 °C (- 5,0 … + 100,0 °C) |
Connection
|
|
Conductivity, Temperature
|
1 x 7 pole bayonet connector for connection of different measuring cells
|
Supported temperature sensors
|
Pt1000 or NTC (10k) |
Interface / ext. supply |
4-pole bayonet connector for serial interface and supply (with accessory USB 300)
|
Display |
two 4.5 – digit seven-segment display (15 mm and 12 mm)
|
Protectionclass
|
IP67(housingandconnections)
|
Dimensions
|
160x86x37mm(WxHxD) incl. protection cover
|
Weight
|
250 g incl. battery and protective armouring
|
Housing |
impact resistant PA 6 G B30 housing with pop-up clip
|
Power supply |
2 x AAA-battery (included) power consumption: < 6,25 mA
|
Battery life | 160 hours |
depends on cell constant of used electrode
* cell constant 0.01 / cm ** cell constant 0.1 … 1.2 / cm |