เครื่องวัดสารทำความเย็น รุ่น CLD-100 แบรนด์ Elitech

Refrigerant Halogen Leak Detector

Elitech CLD-100 Halogen Leak Detector is an economic and practical halogen detection device with latest leaks detection technology. CLD-100 Halogen Leak Detector may also be used to detect leaks in other systems and storage/recovery containers. It is easy to operate, reliable in performance and compact in size.

Features:

• Incorporated with advanced leak detect technology. It's an ideal and economic halogen leak detector.
• Compact in appearance, it is stable and easy to operate.
• Detect all kind of halogen refrigerants.
• Sensitivity can be adjusted at any time and the detector can be adjusted automatically to the best state of detection.
• Inner precise IC with ultra-low circuit consumption offer more stable function and lengthens battery life.
• Dual-color visual display of battery voltage.
• Excellent sensor brings high sensitivity and long service time.

Technical parameters:

1. Operating temperature: 0℃-52℃(30°F to 125°F); 
2. Maximum sensitivity: 6 g/yr, for all halogenated refrigerants;
3. Battery life: approximately 20 hours of normal use;
4. Response time: Instantaneous;
5. Work mode: continuous, no limitation;
6. Fixed probe length: 20cm;
7. Dimensions: 22.9*6.5*6.5(cm);
8. Warm-up time: approximately 6 seconds;
9. Reset time: 2 to 10 seconds;
10. Power Supply: 6V DC, 4AAA Batteries

Detection Range:

The CLD-100 may also be used to detect leaks in other systems and storage/recovery containers.It will respond to all halogenated (including Chlorine and Fluorine) refrigerants. This includes but not limited to:
• CFCs e.g.R12,R11,R500,R503 etc.
• HCFCs e.g.R22,R123,R124,R502 etc.
• HFCs e.g.R134a,R404a,R125 etc.
• Blends such as AZ-50, HP62, MP39 etc.
• Detect Ethylene Oxide gas leaks in hospital sterilizing equipment (it will detect the halogenated carrier gas).
• Detect SF-6 in high voltage circuit breakers.
• Detect most gases that contain chlorine, Fluorine and Bromine(halogen gases).
• Detect cleaning agents used in dry cleaning applications such as perchloroethylene.
• Detect halogen gases in fire-extinguishing system.

Battery lndicator:

• The forepart light of panel indicates the leak and the battery voltage.
• GREEN Battery voltage is normal, sufficient for proper operation.
• ORANGE Battery voltage is approaching the lower threshold for operation.

Operation Instruction:

- Switch the detector on and buzzer will beep discontinuously.- Verify the battery and voltage level by observing the power indicator.
- Adjust appropriate sensitivity, or adjust the sensitivity at any time during operation. This adjustment will not interrupt detection.
- To detect leak when the detector is switched on for 6S.
- When refrigerant leak is detected, the buzzer will change to a “sire” type sound.
- Verify the place where siren sounds and detect continuously until the leak is located.

Package includes:

• 1 x Halogen Leak Detector
• 1x Instruction
• 1x Portable Case